| |
Cylindrical Cam
- Made from 17-4 PH stainless steel.
- Used in a pharmaceutical delivery system.
- Thin walls (< 0.045").
- Location of cam ramps to locating tabs assured through mold control.
- Sharp corner on cam filled out, with radii < 0.003".
|
|
| |
|
| |
RF Microwave Housing
- Made from 2200 Fe-Ni steel.
- Used for magnetic shielding & heat dissipation.
- Different geometries molded off the same tool by using cavity inserts.
- Replaces machined housings at a substantial cost savings.
- High production rates sustained by using four-cavity tool.
- Company logo can be imprinted on side of part.
- Parts threaded as a secondary operation.
|
|
| |
|
| |
Handle
- Made from 17-4 PH Stainless Steel.
- Sintered density of 7.65 g/cc.
- Replaces a cast & machined handle.
- Cored-out sections allow for weight reduction.
|
|
| |
|
| |
Socket
- Made from 17-4 PH Stainless Steel.
- As-sintered hardness of Rc 25.
- 17-4 PH chosen for its excellent combination of strength & corrosion resistance.
- Complex 3-D geometry.
|
|
| |
|
| |
Plug
- Made from 17-4 PH Stainless Steel.
- Complex 3-D geometry.
- Mates with MIM Socket.
|
|
| |
|
| |
Pocket Tool Key
- Made from 420 Stainless Steel.
- Combination of good corrosion resistance/high hardness.
- Long L/D ratio.
- Thin sections (< 0.065") filled over a wide area.
- Product information molded directly into the part.
|
|
| |
|
|
