Locations, Information & Directions

 
 

 


Overview

Continuous
Improvement


History

Locations /
Directions

 
 

Please select a NetShape location:

   

 

NetShape Technologies Inc. : Falls Creek, Pennsylvania

 
     


NetShape Technologies Inc. (Falls Creek)
409 Third Street
Falls Creek, PA 15840, USA
Phone:1. 814.371.0184

 
                                         
   

Directions to our Falls Creek Facility from:

 
     

Pittsburgh Airport

 
     

Dubois-Jefferson County Airport

 
                                         
   

Directions to our Falls Creek Facility from Pittsburgh Airport
(map below directions)

 
   

approximately 2 - 2.5 hours

 
     

Depart Pittsburgh International Airport

  1. Start out going SOUTH on AIRPORT EXIT towards Rental Car ACC by turning LEFT
  2. Take the PA-60 SOUTH ramp towards Pittsburgh.
  3. Merge onto PA-60 S.
  4. PA-60 S becomes PA-60 S/Airport Pkwy.
  5. PA-60 S/Airport Pkwy becomes PA-60 S/US-22 E/US-30 E.
  6. Take the PA-60 South exit towards Crafton (I-79 N).
  7. Merge onto PA-60 S/Steubenville Pike.
  8. Take the I-79 North exit towards Erie.
  9. Merge onto I-80 Junction East exit towards Clarion.
  10. Merge onto I-80 E.
  11. Take the US-219 exit, exit number 97, towards Dubois/Brockway.
  12. Keep LEFT at the fork in the ramp.
  13. Turn RIGHT onto US-219 S.
  14. Turn RIGHT onto PA-830 West.
  15. Turn LEFT onto 950 South
  16. NetShape Allegheny Powder Metallurgy, Inc. is located 1 mile down on the LEFT.

Go to top


 
                                         
   

Directions to our Falls Creek Facility from Dubois-Jefferson County Airport

 
     
     

Depart Dubois-Jefferson County Airport

  1. Turn right out of airport towards Falls Creek onto ROUTE 830 EAST (approximately 7 miles)
  2. Turn right onto ROUTE 950 SOUTH towards Reynoldsville
  3. Keep going straight until you reach NetShape Technologies/Falls Creek on the left (1/2 mile) - you can't miss us!

Go to top


 
                                         
                                         
 

NetShape Technologies Inc. : Clearfield, Pennsylvania

 
     


NetShape Technologies Inc. (Clearfield)
Appalachian Road
Clearfield, PA 16830, USA
Phone 1.814.765.2474

 
                                         
   

Directions to our Clearfield Facility via interstate 80
(map below directions)

 
   

When you exit 80 you are approximately 5 minutes from facility

 
     

Depart Pittsburgh International Airport

  1. Take Route 60 East to Interstate 80.
  2. Take Interstate 80 East all the way to Exit 120.
  3. At bottom of exit ramp, take RIGHT.
  4. Go straight through first traffic light.
  5. At third light take a LEFT onto Industrial Park Road.
  6. Go approximately 1/2 mile.
  7. On your right you will see two small signs (one for Appalachian Wood Products and one for NetShape Clearfield Powdered Metals).
  8. At these signs take the RIGHT
  9. We are the first plant on the right.

Go to top


 
                                         
                                         
 

NetShape Technologies Inc. : Campbellsburg , Indiana

 
     


NetShape Technologies Inc. (Campbellsburg)
596 W. Oak St.
Campbellsburg, IN 47108, USA
Phone: 1.812.755.4501

 
                                         
   

Directions to our Campbellsburg Facility from:

 
     

Louisville International Airport

 
     

Indianapolis

 
                                         
   

Directions to our Campbellsburg Facility from Louisville International Airport
(map below directions)

 
   

approximately 1.5 hours

 
     

Depart Louisville International Airport

  1. From Louisville take I-65 North to Indiana State Road 60 West (Hamburg/Salem Exit #7).
  2. Follow State Road 60 West through Salem.
  3. At the edge of Salem, at flasher, turn RIGHT to Campbellsburg.
  4. Campbellsburg is approximately 10 miles west of Salem on State Road 60.
  5. At Campbellsburg, go STRAIGHT through flashing light.
  6. Helsel is approximately 1/4 mile from flashing light on the right side of highway.

Go to top


 
                                         
   

Directions to our Campbellsburg Facility from Indianapolis

 
   

approximately 2 - 2½ hours

 
     
     
  1. Take I-65 SOUTH to the SALEM/SCOTTSBURG EXIT #29.
  2. Turn right onto Highway 56 WEST (approximately 18 miles to SALEM).
  3. Go through SALEM on HIGHWAY 56 to the edge of SALEM.
  4. Turn right onto HIGHWAY 60 WEST and take to CAMPBELLSBURG (approximately 10 miles).
  5. Our Plant is on the second road to the right past the caution light on the west edge of CAMPBELLSBURG.

Go to top


 
                                         
                                         
 

NetShape Technologies Inc. : Sellersburg, Indiana
HEADQUARTERS

 
     


NetShape Technologies Inc. (Headquarters)
8751 Old State Road 60
Sellersburg, IN 47172, USA
Phone: 1.812.248.9273

 
                                         
   

Directions to our Sellersburg Facility from:

 
     

Louisville International Airport

 
     

Indianapolis

 
                                         
   

Directions to our Sellersburg headquarters from Louisville International Airport
(see maps)

 
   

approximately 30 minutes

 
     

NetShape Sellersburg DirectionsDepart Louisville International Airport

  1. Head south on Midfield Access Rd toward Grade Ln: 0.4 mi
  2. Turn left at Grade Ln: 1.2 mi
  3. Slight right to stay on Grade Ln: 194 ft
  4. Slight right at Preston Hwy: 279 ft
  5. Slight right to merge onto I-65 N (Entering Indiana): 14.5 mi
  6. Take exit 7 for IN-60 toward Salem: 0.4 mi
  7. Turn left at IN-60 (signs for IN-60 W/Salem): 1.6 mi
  8. Turn right at Old State Rd 60: 226 ft


NetShape Sellersburg Directions


Go to top


 
                                         
   

Directions to our Sellersburg headquarters from Indianapolis

 
   

approximately 2½ - 3 hours

 
     
     
  1. NetShape Sellersburg DirectionsTake I-65 SOUTH to exit 9 toward New Albany: 102 mi
  2. Merge onto IN-311 S: 0.6 mi
  3. Turn right at Old IN-60 and Old State Rd 60. Continue to follow Old State Rd 60



Go to top


 
                                         
                                         
 

NetShape Technologies Inc. : Spring Grove, Illinios

 
     


NetShape Technologies Inc. (Spring Grove)
8104 N. Solon Road
Spring Grove, IL 60081, USA
Phone: 1.815.675.2373

 
                                         
   

Directions to our Spring Grove Facility from Chicago O'Hare International Airport
(map below directions)

 
   

approximately 1 hour

 
     

Depart Chicago O'Hare International Airport, follow signs to I190

  1. Take I190 and watch for signs indicating I294/I90.
    Once on I294, I90 cones quickly.
  2. Take I90 toward Rockford.
  3. Continue on I90 to I290/53 North.
  4. Take I290/53 North to Lake-Cook (End of 53N).
  5. Turn LEFT (West) on Lake-Cook Road.
  6. Continue west on Lake-Cook to US12.
  7. Turn RIGHT (North) on US12.
  8. Continue North on US12 to North Solon Road through Volo and Fox Lake, you will cross South Solon Road and then East and West Solon Roads.
  9. Turn RIGHT on North Solon Road
    You will be traveling North on North Solon Road.
  10. Continue North and turn RIGHT (East) on North Street (first intersection, and before the railroad tracks).
  11. Our office parking lot is between the building and the cemetery.

Go to top


 
                                         
                                         
 

NetShape Technologies Inc.—MIM: Solon, Ohio

 
     


NetShape Technologies Inc.—MIM (Solon)
31005 Solon Road
Solon, OH, 44139
Phone: 1.440.248.5456

 
                                         
   

Directions to our MIM Facility from Cleveland Hopkins International Airport
(map below directions)

 
   

approximately 25-40 minutes

 
     

Depart Cleveland Hopkins International Airport

  1. From airport take 480 EAST for approximately 25 miles.
  2. You will be looking for 422 EAST as you approach a clover leaf where 480 turns South and joins up with HIGHWAY 271
  3. HIGHWAY 422 will seem like a continuance of 480.
  4. As soon as you are on 422 EAST, you will look for the first exit which is COCHRANE ROAD.
  5. At the offramp head RIGHT (South) through two stop lights (approximately 1 mile) to SOLON ROAD.
  6. Turn LEFT (East) and go approximately 1/2 mile.
  7. The plant will be on your LEFT.

Go to top


 
                                         
                                         
 

NetShape Technologies Inc. : Suzhou, China

 
     


NetShape Composites (Suzhou) Co., Ltd.
56 Huoju Road Suzhou New District
Jiangsu, China 215009
Phone: 86-512-68081128
Fax: 86-512-68090609

Go to top


 
                                         
                                         
                                         

 

Who We Are | Products | Markets | Conversioneering | MIM | Capabilities | Technology | Globalization | News & Events | Get Quote | Legal | Site Map

 
 

NetShape Technologies Inc. Headquarters
8751 Old State Road 60, Sellersburg, IN, 47172, USA
Telephone +1.812.248.9273
Email Solutions@netshapetech.com
copyright 2004, 2007. All rights reserved. NetShape Technologies Inc. is a Saw Mill Capital company